Home / Cars & Vehicles / Motorcycles / Other
Description : 12 Feb, 2024
Rockford Fosgate RFKHD9813 Installation Kit Install Rockford pact Power and Punch amplifiers in select 1998-2013 Harley-Davidson motorcycles
About the Rockford Fosgate RFKHD9813 Installation Kit
Amp up your Harley
The RKFHD9813 kit allows you to install a Rockford Fosgate Power or Punch pact-chassis amplifier in select 1998-2013 Harleys. The kit includes everything you need to install your new amp, from wiring harnesses right down to the screws. Add some good speakers and you'll be ready to rock!
install a Rockford pact-chassis amplifier in select 1998-2013 Harleys everything you need to install your new amp warranty: 2 years MFR # RFKHD9813 What's in the box:
Rockford Fosgate RFKHD9813 Installation Kit owner's manual Amp mounting plate for select Harley-Davidson motorcycles Type 1 bracket (large) Type 2 bracket (small) 76" 8-gauge Power/ground harness with in-line 60A MAXI fuse and fuse holder 9.5' Rear Input/Output harness 32" Front output harness 18" Front input harness 4 Flat-head screws (requires 2mm Allen wrench) 4 Pan-head screws (requires T-10 Torx wrench) Two 3/4" threaded pins (requires 2mm Allen wrench) Installation and Operation Manual
Features Overview: The Rockford Fosgate RFKHD9813 is an amplifier installation kit, designed to add a Rockford pact chassis amplifier onto a 1998-2013 Harley Davidson motorcycle. The kit contains a mounting plate, power, signal, and speaker wiring.
Compatible Amplifiers: The installation kit is specifically designed for RF'pact chassis amplifiers. This includes the following models: PBR300X2, PBR300X4, T400X2ad, TM400X2ad, and TM400X4ad. Threaded mounting screw holes on the included mounting plate are marked for specific mounting locations of the two- and four-channel Punch or Power Series amps. The hardware for mounting the amplifier is also included.
Compatible Motorcycles: The kit will mount and wire the amplifier in 1998 to 2013 Ultra Classic, Electra Glide, Street Glide, Tri Glide, Road Glide, and Road Glide Ultra models. (May not patible with CVO and Screaming Eagle models.)
Kit Contents: The RFKHD9813 amp installation kit contains the following:
Mounting plate/Brackets: The mounting plate is designed to hold the amplifier, and provide an additional heatsink to cool the amp. A large bracket (labeled Type 1) is used on Road Glide and Road Glide Ultra models, and mounts to the clutch-side turn signal bracket. A smaller bracket (Type 2) is to be used on Ultra Glide, Electra Glide, and Tri Glide motorcycle fairings, and mounts the amp to the top of the factory radio. (It does not work on models with the Communication Module.) Hardware is included for mounting the brackets to the plate. Power and Ground Harness: This harness has 8-gauge power and ground wire terminated into a Molex plug that directly connects to the amplifier. The other ends of the cables have ring terminals to connect the wiring directly to the battery. The power wire has an in-line fuse holder with a 60A MAXI fuse. The power wires are cut to length: Power wire is 74", while the Ground wire is 53". Front Speaker Input Harness: This pre-terminated, 18" harness has a 4-pin Molex plug that connects directly to the amp's front input socket, and to the factory front speaker wire harness. Front Speaker Output Harness: This 32" pre-terminated 16-gauge speaker output harness has a 4-pin Molex plug that connects directly to the amp's front output socket, and female quick slides that connect to the motorcycle's front speakers. Rear Speaker Output/Input Harness: The longest harness in the kit (at 9.5 feet) contains both the input and output connectors for the rear channels. This harness is used only when installing a 4-channel amplifier. The input connector is a 4-pin Molex plug that plugs into the amp's rear input socket. Female quick slides connect to the factory stereo's rear speaker wire harness, and to the factory rear speakers. The input wires are color coded purple and green, while the output wires are silver and bronze, and labeled for connecting to the clutch-side and brake-side rear speakers.
Related Articles
Rockford Fosgate Punch P1-1X12 Single 12" Subwoofer 250 Watts RMS Dimensions: 15.5" Height 19.25"Width 16" Depth Item # 1329955 See our other ads at S
Selling these KnuKonceptz Amplifier installation kits as I no longer need them. They are brand new still in packages. Asking $30 each or $50 together.
2013 Harley Davidson Ultra Glide Classic 14,000 kms Please for additional pictures $21,000 or best offer
New in box stage 2 sound system for 2014 and up Harley ultra/ Electra Glide. See description in pics. $1500. or best. My loss your gain.
2013 HD slim 103ci. Vivid black V&H Chrome big radius pipes V&H fuel pack tuner ( programable thru the app) Screaming eagle air cleaner Mustang diamon
2013 883 super low XL883L super low orange & beer bottle 2 tone Harley paint. This bike has Harley stage 1 tune, Vance and Hines short shot pipes, pro
2013 Harley Davidson fat bob. Around 10,000 km. Asking 13500 obo. Few extras on the bike.
For sale is this custom built Harley Davidson Road glide using: Bad dad front fender Bad dad stretched tank Bad dad stretched bags & rear fender Comes
2022 - Polaris RZR S 1000 Ultimate 1000 cc Prostar engine (100 hp) 1056 km Ultimate package with / Bluetooth & Navigation Rockford Fosgate stereo Rear
2022 - Polaris RZR S 1000 Ultimate 1000 cc Prostar engine (100 hp) 1056 km Ultimate package with Bluetooth & Navigation Rockford Fosgate stereo Rear b
Brand new Only 156 Kms Technology package B&O sound system Car cover Clean carfax Private sale/No GST/No luxury tax Willing to do a trade with Mercede
Vinyle double, the Kinks - one for the road (33 tours) LP Le disque est en bon état "REFLETS DE LUMIÈRE SUR LE DISQUE"
Sorry board game in excellent used condition, all pieces included and accounted for. Please check out all my other games! Pick up please in River Park
Sony PULSE 3D Wireless Gaming Headset for PlayStation 5 - White Get the perfect sound for your gaming and entertainment experience with the PULSE 3D w