Description : 13 May, 2023
6 new KDE Direct electric motors, KDE4012XF-400 for quadcopter, hexacopter or drone. They have never been used or installed, still in original box. You won't find a better quality motor then KDE. $750 for all six.
Description: The new KDE Direct 4012XF-400 (D5) Multi-Rotor Brushless Motor is an extremely efficient and powerful motor for numerous multi-rotor and heavy-lift applications, and was designed to bring high-quality and vibration-free motors to the market. The motors are designed with performance and durability in-mind, with features unseen in the current market: (1) high-grade, 240 deg-C continuous (340deg-C maximum) high-temperature solid-core copper windings for failure-free operation in extreme-climates, (2) Japanese-built, 0.2 mm silicon-steel stator laminations and Kevlar tie-wraps for high-efficiency performance, and (3) triple-bearing supported, ABEC-7 bearings for maintenance-free and worry-free flying for hundreds of hours. These are just a few of the advantages built-in to these motors, and every detail of the motors was scrutinized to produce the absolute best available; for a wide-range of flight applications.
Specifications: Kv (Motor Velocity Constant) 400 RPM/V Kt (Motor Torque Constant) 0.0239 Nm/A Km (Motor Constant) 0.0844 Nm/√(W) Maximum Continuous Current* 32 A (180 s) Maximum Continuous Power* 945 W (180 s) Voltage Range 14.8 V (4S LiPo) - 34.8 V (8S LiHV) Io (@10V) 0.5 A Rm (Wind Resistance) 0.080 Ω Stator Poles 18 (18S24P) Magnetic Poles 24 (18S24P) Bearings Triple, 685ZZ/625ZZ Mount Pattern M4/3 x ф25 mm, M3/2.5 x ф32 mm Stator Class 4012, 0.2 mm Japanese Shaft Diameter ф4 mm (ф5 mm Internal) Shaft Length 5.5 mm Motor Diameter ф46.5 mm Motor Length 30 mm Motor Weight 145 g (200 g with Wires/Bullets) Propeller Blade Size Up to 18.5"-TP (15.5"-DP Maximum on 8S) Motor Timing 22° - 30° ESC PWM Rate 16 - 32 kHz (600 Hz)
Related Articles
12 foot Starcraft boat with Minkota electric motor. Would trade for a peddle boat. Boat is located near Kazabazua, Quebec and will only be accessible
First bigger motot is 1hp single fase with a 5 speed pully off drill press or lathe. Smaller motor is 1hp 3 fase. 60 dollars each...update..1hp 3 fase
2.H.P.Single Phase 220 Volt Marathon Four in one 50.HZ.2850 .RPM.C.C.W.Rotation.C.W Rotation..Model.4N56B34F5328F,,never hookt to the Grid.was a spare
Johnson 2 ho electric motor from a full functioning treadmill these motors are perfect to make 72" grinders or sanders. Very sought out by woodworkers
All New parts, new design and fabriaction Superior 35 degree Troughing idlers Heavy duty wing tail pulley Heavy duty deep truss frame 25hp electric mo
Hospital bed with electric controls; only one apparent problem: electric motor only raises upper portion half-way. Priced for quick sale.
Edco CPM-8 Scarifier Features: 8" working width will scarify approximately 350-500 sq ft per hour at a depth per pass of 1/8" Removes traffic lines at
Very stable boat/kayak with a 600lb weight capacity. Excelent for recreational, fishing or hunting rides. Comes with an two swivel seats. Includes: -
This Asphalt Plant is available via online auction until Apr. 25. Visit our website or call our toll free number at 1800-263-4193 for more auction det
Craftsmen 13 in. Bench-Top Drill Press 5/8 chuck, 5-speed bench top 5/8 drill press. Powerful 3-1/4 HP electric motor. Speeds ranging from 500 to 3,10
Brand new.Never been used.still in the box.Retails $465.00.Asking $150.00 o.b.o.
Used front windshield removed from an Alfa Romeo Spider. Corners are good with no delamination or chips, but has two scratches on passenger side as sh
It's brand New-(Nike AirMax 97) been in my closet for a bit too long , time to get rid of it. Haven't been worn not a single time.