$130,000.00 NEW COST THAT IS AS NEW DUAL DRUM CUTTER 25-42 TON EXCAVATOR C/W 4 CUTTING DRUMS BUT WILL WORK ON ANY 200 CLASS AND LARGER EXCAVATOR IF YOU HAVE ENOUGH FLOW

LITTLE USED ROCKWHEEL D30 DUAL DRUM CUTTER C/W 2 MOUNTED TRENCHING CUTTING DRUMS

AND 2 OPTIONAL WIDER SCALING CUTTING DRUMS C/W ALL PICKS (TEETH)

ONE SET OF CUTTERS IS TWO STAGGERED ROWS OF PICKS (TEETH) GIVING A TRENCH WIDTH OF 36 INCHES FOR TRENCH WORK

ANOTHER SET OF CUTTERS IS THREE ROWS OF STAGGERED PICKS (TEETH) GIVING A CUT WIDTH OF 46 INCHES FOR FACE SCALING WORK

THIS UNIT IS $80,000.00 USD FOR THE DRUM CUTTER WITH TWO DRUMS AND A MOUNTING BRACKET

THE TWO AS NEW SPARE CUTTING DRUMS C/W ALL PICKS (TEETH) ARE $20,000.00 USD

HAVE AS NEW HOSES C/W QUICK COUPLERS

AND PIN GRABBER 80MM PINS TOP PLATE

FOR A TOTAL COST OF $100,000.00 USD WHICH TODAY IS $131,000 cdn

IT WAS USED ON 1 JOB WITH VERY LOW TOTAL HOURS

TAKE THE UNIT WITH THE TWO SPARE DRUMS FOR $65,000.00 CDN WHICH IS LESS THAN 1/2 THE PRICE - READY TO WORK NOW

LOCATED OUR YARD LANGLEY BC - WILL SHIP QUICKLY IN CANADA NEXT BUSINESS DAY AND WE WILL PAY THE TRUCKING

FRANK 604-476-7777

_feac

DC30 SPECIFICATIONS

Input Power hp (kW) 150 (110)

Required Flow Rate GPM (l/min) 55-110 (208-412)

Max Operating Pressure max. psi (bar) 5800 (400)

Drum Speed RPM 50 - 75

Cutting Head Torque (max) ft.lb (Nm) 19,715 (26.7)

Cutting Force (max) lbs (kN) 17,752 (79)

Head Width (standard drum / *narrow drum) in (mm) 46 (1156) / *37 (935)

Picks TEETH 66 TOTAL

Weight (without bracket) lbs (kg) 3185 (1444)

The Rockwheel line from Alpine incorporates the latest developments in hydraulic rotary cutting technology. Commonly referred to as “drumcutters”, “cutterheads”, or “rock grinders” this is a must-have attachment if you’re involved with rock excavation, trenching, mine scaling, demolition, concrete milling and more…

Rockwheels fill the niche for cutting ground too hard to rip yet not too hard enough to require heavy hammers or drilling and blasting. The Rockwheel team invented this technology over 25 years ago and has continued with product development and improvement ever since. Put our experience to work for you!

Concrete Cutting Application

For concrete cutting Alpine Cutter Heads have both the precision cutting and power needed to be the most effective and accurate concrete cutter on the market. Whether your project involves scaling concrete walls, abutments or dams, or wholesale concrete cutting, Alpine’s line of Cutter Heads have a proven record helping contractors reach efficient and highly productive work rates.

TC-D Excavating Application

The Alpine Transverse Cutter Head is an ideal tool for excavating soil, rock, asphalt and concrete bination of cutting force and cutting precision make this an economical and efficient attachment.

Mining/Tunneling Mining and Tunneling Application

Applications Mining-Tunneling for Alpine Cutter Heads have pleted various tunnel expansions and new tunnel construction for a variety of uses. From railroad tunnel enlargement to wine cave tunneling, Alpine is the go-to attachment. With a wide range of Rotary Cutter Head sizes, Alpine can outfit any of your machines to modate small tunnel work with skid steer loaders, Brokks, mini excavators, and backhoes to large excavators or other hydraulic-ready carriers.

Trenching & Pipeline Application

Rock Grinder heads have consistent dimensions and are perfect for Trenching & Pipeline. Trench walls are smooth and vertical and the surrounding rock mass is not disturbed. Because trench walls are vertical, regardless of depth, the volume of material excavated is minimized.

Precision cutting provides for a flat bottomed trench and the ability to control grade. Precision cutting also allows safely working around existing utilities.

Demolition Application

In the demolition application the impact angle between the tips of the cutter bits (picks) and the concrete surface does not exceed 45 degrees. The smooth, low-noise, vibration-free machining action of the bits neither destroys nor causes micro-cracks in the underlying sound concrete. The Transverse Cutter Head can be used for rehabilitation of sensitive concrete structures such as foundations and bridge abutments and for excavation near lock gates.

The Transverse Cutter Head can be used for rehabilitation of sensitive concrete structures such as foundations and bridge abutments and for excavation near lock gates. The impact angle between the tips of the cutter bits (picks) and the concrete surface does not exceed 45 degrees. The smooth, low-noise, vibration-free machining action of the bits neither destroys nor causes micro-cracks in the underlying sound concrete. In Addition to concrete scaling, several mining operations utilize the cutter head for scaling loose debris after drill and blast operations. The attachment can quickly and effectively knocks down boulders and chunks that fail to release during blasting.

Scaling Concrete Scaling Application

The Transverse Cutter Head can be used for rehabilitation of sensitive concrete structures such as foundations and bridge abutments and for excavation near lock gates. The impact angle between the tips of the cutter bits (picks) and the concrete surface does not exceed 45 degrees. The smooth, low-noise, vibration-free machining action of the bits neither destroys nor causes micro-cracks in the underlying sound concrete. In Addition to concrete scaling, several mining operations utilize the cutter head for scaling loose debris after drill and blast operations. The attachment can quickly and effectively knocks down boulders and chunks that fail to release during blasting

Quarrying Quarrying Application 2

Alpine’s Cutter Head attachments are versatile and powerful enough to handle any of your quarrying needs. Increase production and maneuverability with a unit from our range of Cutter Heads that will work with any sized machine from skid steer loader to excavator.

Shaft Sinking Shaft Sinking application

The Alpine Cutter Head attachments are a great tool for shaft sinking. With the power of the patented gear-reduction transmission coupled with a world class hydraulic motor and the precision cutting our units offer, Alpine Cutter Head’s are a versatile shaft sinking attachment that can fit on any sized carrier you need to fulfil your project goals.

Alpine Cutter Heads are built not only to withstand the rigors of hard rock cutting and grinding, but can also easily be fitted for underwater cutting work. Our fully waterproof systems have been proven effective in submerged excavating in fresh and salt water. We also offer custom extended booms for deeper work.

All of Alpine’s Rotary Cutterheads can be fitted with stump grinding specific bits that make short work of any sized stump. Outfit your skid steer or backhoe with a rotary cutterhead and a set of stump picks, and you’ll have great production and a versatile attachment that can grind, demolish, trench, and remove stumps.

Footers cutting rock footing application

Alpine Cutter Heads are incredibly powerful attachments that can handle grinding and cutting most types of rock. The design and power give the Transverse Cutter the ability to make precise trenches and footer excavations. Precision cutting minimizes machine time, backfill and concrete volume. Our cutterheads offer highly accurate grinding in and around tight spaces and existing utilities; ability to cut through the most difficult rock. Alpine Cutterheads offer the ability to excavate to tight tolerances, perfect for footings and other precise trenching operations.